508d install question

Home / the12volt's Install Bay / Car Security and Convenience / 508d install question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nseck

Member - Posts: 7

Joined: May 24, 2004

Location: United States

Posted: June 08, 2004 at 12:26 PM / IP Logged

I have the viper 791xv and I do not know where to plug in the 508d's wiring harness. There are no plugs left does the 508d pug into the slot where the shock sensor goes or not on the viper module. thanks for your help

Back to Top

Ashez

Member - Posts: 26

Joined: May 08, 2004

Location: United States

Posted: June 08, 2004 at 4:22 PM / IP Logged

You gotta tap the wires from the 508 to the wires for your shock sensor... I dont remember how it is exactly, but I'll try to find out for you...

Back to Top

zargon

Copper - Posts: 186

Joined: January 27, 2003

Location: United States

Posted: June 08, 2004 at 6:13 PM / IP Logged

i think you tie the two wires together from the 508d and tie the twowirestogether fromthe shocksensor and run the two from the shock sensor tothe blue wire and runthe two from the 508d to the green wire

zargon ruler of estranorth

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

508d install question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.