the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

anyone familiar with BCM's??

Home / the12volt's Install Bay / Car Security and Convenience / anyone familiar with BCM's?? (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
gpgtp00 
Copper - Posts: 81
Copper spacespace
Joined: April 11, 2002
Location: United States
Posted: September 09, 2002 at 4:59 PM / IP Logged  
I think i may have just smoked my BCM bc my locks dont work anymore! Any ideas anyone? I was trying to hook up my unlock wires and on my 2000 Grand Prix, it had 2 tan wires (1 = driver door, 1=pass door) and when i put those two wires together,,, no more locks. Any help would be appreciated. Thanks
go2pac 
Copper - Posts: 179
Copper spacespace
Joined: May 04, 2002
Location: California, United States
Posted: September 09, 2002 at 5:42 PM / IP Logged  

I assume that you seperated those two wires and checked for blown fuses? And what was your purpose of connecting those two wires?

Karl
Pacific Accessory Corporation
Mobile Audio Interfacing Equipment
Connecting You to Your Music Since 1976
gpgtp00 
Copper - Posts: 81
Copper spacespace
Joined: April 11, 2002
Location: United States
Posted: September 09, 2002 at 7:32 PM / IP Logged  

anyone familiar with BCM's?? -- posted image. i misread my diagram and was gonna use those for the unlocking leads. Bad idea!! I ops checked the module. I did burn it. anyone familiar with BCM's?? -- posted image. Oh well.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 10, 2002 at 12:43 AM / IP Logged  

Unfortunately for you the BCM for the doorlocks are also connected to the BCM for the lights, interior, and other functions of the car. The BCM costs $ 300.00 Canadian to replace and yes... I'm talking from experience here !!anyone familiar with BCM's?? -- posted image.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
gpgtp00 
Copper - Posts: 81
Copper spacespace
Joined: April 11, 2002
Location: United States
Posted: September 10, 2002 at 12:50 AM / IP Logged  
dayum... they cost $300 in Canada? Us they cost $115. I just priced them a little while ago. Wel, at least i got the alarm hooked up minus some minor bugs. The siren isnt sounding off if you pull the power for the alarm. I thought the Smart Siren was suppose to keep sounding in case a thief pulled the wires for the alarm???
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 10, 2002 at 12:53 AM / IP Logged  

Isn't there a 9 volt battery that you hook up the those sirens ? I'm not familiar with the Smart Sirens that you are referring to .

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
go2pac 
Copper - Posts: 179
Copper spacespace
Joined: May 04, 2002
Location: California, United States
Posted: September 10, 2002 at 9:24 PM / IP Logged  
If you are talking about the Clifford smart siren, it knows what state it was last in when the main power is disconnected. So if the alarm was disarmed, then disconnecting the battery would not make the siren sound. And when you connect the battery up the siren will still not sound. But if the alarm was armed and you disconnect the battery, thats when it sounds.
Karl
Pacific Accessory Corporation
Mobile Audio Interfacing Equipment
Connecting You to Your Music Since 1976
gpgtp00 
Copper - Posts: 81
Copper spacespace
Joined: April 11, 2002
Location: United States
Posted: September 10, 2002 at 10:11 PM / IP Logged  
go2pac, it is the smart siren. What i was wondering was ... the manual said that if someone trys to cut the power to the smart siren, it would keep going bc of the battery in it. I tried it, but it didnt work. I just read though that it charges only when the ignition is on, so its probably not charged up.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer