Alarm in a Probe

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Alarm in a Probe (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Fruhead

Member - Posts: 11

Joined: September 10, 2002

Location: United States

Posted: September 10, 2002 at 11:12 PM / IP Logged

I've been trying to wire in an alarm for a 95 probe, and just found out the the locks are 1 wire, which helps... I was going crazy trying to figure out how to get the locks to work. My next problem is the parking lights. When they're off, the switch has current, and when they're on, they don't. Which wire do I tap into for the parking lights to flash, and also, which exactly should I connect the lock and unlock outputs to?

Thanks!

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 11, 2002 at 12:22 AM / IP Logged

PARKING LIGHTSis a brown wire found at the driver kick panel .

Alarm in a Probe -- posted image.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm in a Probe

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.