Central locking & alarm

Home / the12volt's Install Bay / Relays / Central locking & alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

henrygodwin

Member - Posts: 1

Joined: July 09, 2004

Posted: July 09, 2004 at 11:59 AM / IP Logged

Hi there,

I have an alarm that has a ground output on arming to trigger central locking. This output stays grounded while the alarm is armed.

My problem is the central locking controler requires a ground input to lock and a ground input to unlock. Is there anyway I can use a relay to make something that could convert the single negative output that would switch over the two central locking inputs?

jc18750

Copper - Posts: 113

Joined: July 21, 2004

Location: United States

Posted: July 24, 2004 at 4:06 PM / IP Logged

Central locking & alarm - Last Post -- posted image.

questions@mycustomcar.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Central locking & alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.