Aladdin 2000 Alarm???

Not quite following your second last post. Are you saying that the Aladdin will not disarm the alarm when it has ALREADY been remote started ? or that it won't disarm when the car is running with the key ?

when i remote start it and get in and put the key in  its fine. All that works good. But if i just start the car with the doors closed and everything and then push the "e" button on the remote to activate the "quick stop" option , the remote start will not arm. It beeps and the light flashes, but the remote start will not alarm pretty much making the option invalid or unusable. I noticed too that the remote start does not work if the engine isnt running unless the alarm is armed which obviously you wouldnt try and arm the alarm while the engine is running just to use the "quick stop " option. KNow what i might be doing wrong? I appreciate your help Jeff. Ive installed  afew remote starts , but never ran into these kind od probs. Thsi Aladdin is a little different than teh ones ive installed on my cars before.

if the car is a manual and you shut it off using the "E" quick stop button you will NOT be able to restart it with the remote starter.  its a safety feature.  the only way to shut it off is by using the lock/arm button.

the remote start will not work unless the car is armed.  its all about safety.  if the doors or hood could possible be open it is considered a saftey hazard to remote start a car.   

now on the quick stop,  with the key in the igntion and car running, u press the E button, remove the key from the ignition, then exit the car, close the door and then press the ARM button.  the car will stay running and the alarm with arm itself (minus sensors) while the car runs.