04 Hyundai Santa Fe

Home / the12volt's Install Bay / Car Security and Convenience / 04 Hyundai Santa Fe (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

DaRacerz

Member - Posts: 13

Joined: January 12, 2004

Location: New York, United States

Posted: August 10, 2004 at 8:00 PM / IP Logged

Hello, sort of a few questions in one post, but answering anything would be greatly appreciated!!!

First, does anyone have the wiring diagram to install a DEI Alarm w/ Remote Start.

Two, does anyone know where the factory alarm is installed, the wiring diagram to it, and/or if the 04 models come with a Alarm Disable Wire for the DEI Alarm to interface with?

Three, Audio Daigram at the Amp for Monsoon System?

Thanks for all input. Your guys are the best.

Mark

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 11, 2004 at 1:43 AM / IP Logged

1. What DEI system do you need the information on?

2. The OEM security disarms when remote started. The ignition wires sends a signal to the OEM security to disarm the systm.

3. NA

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

DaRacerz

Member - Posts: 13

Joined: January 12, 2004

Location: New York, United States

Posted: August 11, 2004 at 9:20 AM / IP Logged

1. I will be installing the Viper 791xv line remote start with all the goodies. Just need the wiring diagram for the car.

2. So, basically, the stock alarm will not interefere with the aftermarket, or atleast it shouldn't, right?

thx.

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: August 11, 2004 at 9:35 AM / IP Logged

this info is for a '02-'03 so double / triple check it all (but you do that anyway)!

+12V | red & orange| + | ignition harness

starter | blue | + | ignition harness

ignition | blue | + | ignition harness

second ignition | pink | + | ignition harness

accessory | green | + | ignition harness

power lock | yellow | - | driver's kick panel, white 22 pin plug

power unlock | white / black | - | driver's kick panel, white 22 pin plug

parking lights+ | green / orange | + | fuse box, 15 pin plug

parking lights- | white | - | headlight switch

door trigger | yellow | - | fuse box, 8 pin plug

dome supervision | use door trigger |

trunk / hatch pin | black / orange | - | fuse box, 15 pin plug

hood pin(1 & 2) | pink | - | ETACS, 12 pin plug

tachometer(3) | white / black or blue | AC | ECM

horn trigger | brown | - | steering column

__________________________________________________________

1) ETACS module is attached to the back of the fuse box on the bottom

2) hood pin is also green at the switch under the hood

3) ECM is under the center console to the right of the gas pedal. On the 2.4 L A/T it is in the 26 pin plug, the 2.4L M/T it is in the 12 pin plug, and the 2.7L it is in the 40 pin plug

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 11, 2004 at 10:49 AM / IP Logged

DaRacerz wrote:

1. I will be installing the Viper 791xv line remote start with all the goodies. Just need the wiring diagram for the car.

2. So, basically, the stock alarm will not interefere with the aftermarket, or atleast it shouldn't, right?

thx.

1. I'll send you the wiring diagram, just need your email address

2. The Viper will not interfere with the OEM security system when remote started, but you still need the OEM remote control to arm and disarm the OEM system. If you don't want the OEM security to interfere with the Viper system, do not use the OEM remote control to arm and lock the doors. ONLY use the Viper and the OEM system will NEVER arm.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

mito57

Member - Posts: 46

Joined: April 21, 2004

Location: United States

Posted: August 11, 2004 at 11:23 AM / IP Logged

Here's a link to the instalation guide:

http://www.directechs.com/guides/manuals/ig/viper/N564V_6-03.pdf

04 Hyundai Santa Fe - Last Post -- posted image.

DaRacerz

Member - Posts: 13

Joined: January 12, 2004

Location: New York, United States

Posted: August 11, 2004 at 4:35 PM / IP Logged

Velocity Motors, you can send it to daracerz@hotmail.com

Thanks for everyones help and I'm ready to take on the task. Thanks again.

Mark

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 Hyundai Santa Fe

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.