Tachometer Output

Home / the12volt's Install Bay / Car Security and Convenience / Tachometer Output (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Cookiez

Member - Posts: 6

Joined: May 24, 2004

Location: United Kingdom

Posted: August 12, 2004 at 3:38 PM / IP Logged

Hi All.

I have a 2000 Focus, Diesel. Can anyone please tell me where to find the tachometer output.

I'm installing a Clifford intellistart & with no coil I'm a bit stuck where to find an output.

If I test it with a meter what sort of output should I get (AC 1-6 Volts it says in the book, is this right)

Does anyone also know if the interior light is +ive or -ive trigger.

Cheers

Cookiez

Installerny99

Member - Posts: 30

Joined: July 31, 2004

Location: United States

Posted: August 12, 2004 at 10:48 PM / IP Logged

it is correct that, i would check behind the cluster probally looking for the GREEN/ black wire that would be at the coil, you also want to make sure that you connect your wait to start wire. as far as the door trigger most are negative trigger and are a black with blue on some of the focus its black yellow in the kick panel low,

InstallerNY99

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 12, 2004 at 10:51 PM / IP Logged

Best I could find is a 99 ford focus UK. It should be close to the same. Good luck.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Cookiez

Member - Posts: 6

Joined: May 24, 2004

Location: United Kingdom

Posted: August 13, 2004 at 3:31 AM / IP Logged

Thanks Guys for the quick reply.

With my Focus being a Diesel there is no coil.

Would the GREEN/ black wire at the back of cluster still be there??

What sort of output should I test for ?? Just to check.

Do you know the color of the wait to start wire at the back of the cluster??

Thanks again

Cookiez

Member - Posts: 6

Joined: May 24, 2004

Location: United Kingdom

Posted: August 15, 2004 at 3:33 PM / IP Logged

I have sorted the interior light.

its just the tacho input i'm struggling with

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tachometer Output

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.