1995 pontiac trans am, alarm problems

Home / the12volt's Install Bay / Car Security and Convenience / 1995 pontiac trans am, alarm problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

BradM96

Member - Posts: 6

Joined: August 07, 2004

Location: Algeria

Posted: August 12, 2004 at 10:43 PM / IP Logged

ok i have a 5 wire ground at rest door lock system. I used the relay wiring diagram on here for my locks. i have the wored now i can lock and unlock with the remote and lock and unlock with the door switch . but i cant lock unlock with the remote when the door switch is connected. it has to be disconnected in order to use it. and also my siren isnt workin. it has power and it goes off when u hit the panic button but when i lock and unlock it wont go beep beep anymore. any help will be greatly appreciated.

BradM96

Member - Posts: 6

Joined: August 07, 2004

Location: Algeria

Posted: August 12, 2004 at 10:45 PM / IP Logged

it keeps blowin the fuse at the battery to the relays when i hit the remote while the switch is connected. if that helps at all

Installerny99

Member - Posts: 30

Joined: July 31, 2004

Location: United States

Posted: August 12, 2004 at 11:02 PM / IP Logged

its sounds like your alarm is in valet mode check the LED (red light) is it on solid if it is its in valet(silent mode) turn it off.

what kind of car is it i'm guessing a ford. the fuses your blowing are they the alarm fuses or the factory? what size fuses are in there?

it also sound as though you have your switch and motor wires backwards?let me know the answers to those questions it will make it easier to help you.

InstallerNY99

BradM96

Member - Posts: 6

Joined: August 07, 2004

Location: Algeria

Posted: August 12, 2004 at 11:08 PM / IP Logged

the led is blinking so i guess its not in valet mode. its a 1995 pontiac trans am. i looked up the wire colors and wired them to specs. the fuse im vlowin is the fuse on the 12 volt constant from the battery to the relays. it has a 15 amp fuse in it

BradM96

Member - Posts: 6

Joined: August 07, 2004

Location: Algeria

Posted: August 12, 2004 at 11:12 PM / IP Logged

what exactly is valet mode anyway? how would it make this happen?

BradM96

Member - Posts: 6

Joined: August 07, 2004

Location: Algeria

Posted: August 13, 2004 at 10:42 AM / IP Logged

can someone help i really need this to work its been 3 days no and it still wont work so i really need some help

tblanning

Copper - Posts: 60

Joined: March 28, 2003

Location: United States

Posted: August 13, 2004 at 3:27 PM / IP Logged

how do you have it wired? what colors? and where are your connections made?

Power Lock:		LIGHT BLUE	DRIVER KICK PANEL BEHIND INSULATION **
Power Unlock:		DARK BLUE	DRIVER KICK PANEL BEHIND INSULATION **

** If Equipped With OEM Keyless Entry: Lock- RED / BLACK, Unlock- ORANGE / BLACK At Keyless Entry Module In Passenger Kick Panel. Passenger Switch Is Primary Switch; See Note #203 - Reverse Polarity Door Lock Diagram

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 pontiac trans am, alarm problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.