97 Cirrus alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / 97 Cirrus alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Zeplin1073

Member - Posts: 19

Joined: July 08, 2004

Posted: August 19, 2004 at 4:34 PM / IP Logged

I put in a alarm with remote start but the only problem I have is when the car starts with the remote the interior light flash on for a brief second setting off the alarm. The car has a factory alarm which is being bypassed. Any clues to stop the lights from comming on?

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: August 19, 2004 at 7:25 PM / IP Logged

Are you sure you have the right Dis-arm?

OEM Alarm Arm	L GREEN/ ORANGE (+)	BLACK CONNECTOR ON BACK *
OEM Alarm Disarm	L GREEN/ ORANGE (+)	OF FUSE/JUNCTION BLOCK

L GREEN/ ORANGE Single Wire Will Arm & Disarm. Must See 12 VDC (+) Thru A 873 Ohm Resistor To Arm And 12 VDC (+) Thru A 270 Ohm Resistor For Disarm.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Zeplin1073

Member - Posts: 19

Joined: July 08, 2004

Posted: August 22, 2004 at 10:56 PM / IP Logged

I didn't use the resistor since the tech guide I used didn't say anything about it. If the resistor is not used would that cause the interior light to come on for a brief second when it remote starts?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 Cirrus alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.