Am I a bully?

Home / the12volt's Install Bay / Miscellaneous - Off Topic / Am I a bully? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: September 08, 2004 at 3:53 PM / IP Logged

The 4004T has been a solid amplifier for me so far. It is sufficiently clean and powerful that I feel my speakers are the weak spot of my system, rather than the amplifier.

I've used the 2 channel version of the amp, the A2002T, on both my sub and a pair of Eclipse 6x9's. It powers the sub well when bridged for only being a 50x2 channel amplifier. The sound is very clean and noise free. I'm not sure if these are due to the amplifier, coincidence, or the result of another component in the loop, but I have noticed a few things: 1) the bass to all 3 speakers I've hooked up has been slightly warm 2) the highs to both the Eclipse and Quart pairs were slightly bright, but very crisp and clean

Also, the crossover and gain knobs are a tad funny to work with and of poor build quality. The amps themselves are not the sexiest things in the world, but they are heavy and solid. Given the price you can find it at online, I would buy it again. I feel the money spent on a better amp would be subject to very diminishing gains, while I wish I had spent more money on my main speakers. I like the quarts a lot, but am slightly disappointed with some dryness in their upper midrange.

New Project: 2003 Pathfinder

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 08, 2004 at 4:34 PM / IP Logged

If you are a bully, then what does that make me?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: September 08, 2004 at 6:55 PM / IP Logged

auex wrote:

If you are a bully, then what does that make me?

LMFAO !!!

Well . . .

Regards

EVIL Teken . . .

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 08, 2004 at 10:21 PM / IP Logged

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: September 08, 2004 at 11:23 PM / IP Logged

Well this pretty much put my mind at rest, so to speak. I was kinda concerened, just because this board serves to keep me sain and educate myself. Every single day I log on to this board I learn something new, and I thought I had built a decent reputation for myself on here as being somewhat knowledgable, although after reading a recent thread about wire sizes for speakers I suddenly felt dumber :), and when this person pm'd me and called me a bully I started to kinda question some of my posts and what not. But this has pretty much cleared it up so I will continue to act as I do, butt heads with who I do, express myself as I always have and if this person continues to think I am a bully then, well I dont need to finish off that thought. Thanks for the responses.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 08, 2004 at 11:28 PM / IP Logged

Good thinking dude, now go and wrestle some lunch money from that kid on the escalator and tell him who's boss !! Am I a bully? - Page 2 -- posted image.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

heavilymedicate

Silver - Posts: 328

Joined: August 05, 2004

Location: Texas, United States

Posted: September 09, 2004 at 12:26 AM / IP Logged

That thread on wire size left me lacking to, but that is why I come here. To be enlightened, to learn and help others to the best of my ability. Someday I will understand everything in that thread, it was just to much to bite off at once though.

Search for other posts by heavilymedicate

forbidden

Platinum - Posts: 5,352

Joined: November 01, 2003

Location: Alberta, Canada

Posted: September 10, 2004 at 10:54 PM / IP Logged

You are the biggest bully that I know of........ meh, nah, I'm bigger. I'm opinionated I admit, I have been wrong before, which I admit as well, but in my short time here I know I have caused way more good than harm. I too have learned many things from this site and it is a tool more valuable than any one in my toolbox.

Top Secret, I can tell you but then my wife will kill me.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: September 11, 2004 at 1:28 AM / IP Logged

Ah, how could you say that Rob? You know I am the biggest red ass on the forum.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Am I a bully?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.