install guide for Clifford IG7000

I was wondering if someone could help me find an install guide a a Clifford Intelligaurd 7000, I actually have a install guide that is supposed to be for this alarm, and it gives me a general idea and I've hooked up about 85% of the wires up using it, but still in the manual I have it shows some wires in one place that are actually in a differnt place on my alarm it shows a 9-pin connector when mine has a 12, and stuff like that so can anyone can help me out?

http://www.directechs.com/guides/manuals/ig/clifford/intelliguard7000_install.pdf Regards EVIL Teken . . .

Yea that is the same instructions that I have. notice in those instructions it shows a 4 pin connector and on my alarm it is a 12 pin connector, I have manage to connect about 8 or 9 of the 12 wires utillizing both the instructions for the alarm and for the Intellistart IV, but I also have a harness not even mentioned in the instruction at all I have that 24 pin harness that is shown in the in struction then another 10 or 12 pin harness that plugs on the same side. I will try to post pictures A.S.A.P.

http://www.directechs.com/techtips/pdfs/resources/security/clifford_techtips/49000313.pdf There are a few more reference materials available. If I can locate it on my Master Security Disc I will place the link here, via PDF format. Regards EVIL Teken . . .

Actually its an Intelligaurd Millennia not IG7000 if there is a difference...

I have the pictures but not sure on how to get the mon here

thanks for all the help thats just what I needed

You know you really had me going there for awhile. Because I couldnt for the life of me understand how you had two different wiring harnesses. Glad it worked out. Regards EVIL Teken . . .