Avail Phoenix2 Car Alarm

Home / the12volt's Install Bay / Car Security and Convenience / Avail Phoenix2 Car Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Haldanite

Member - Posts: 15

Joined: September 26, 2004

Location: United States

Posted: October 01, 2004 at 10:35 AM / IP Logged

I went to Car Toys to pick up a LED for my alarm and I wasked they guy about installing the alarm and he said because of the fact that the locks are reverse polarity triggered I would have to buy an additional 2 relays. Looking at the installation papers it only shows that I need 1 relay to do the dual stage unlock. Could the instructions be wrong and that's why my locks are dual stage locking instead of unlocking? Also, I want to be able to pop the trunk with one of the accessory channels. Will I need a relay for this? Thanks.

Haldanite

Member - Posts: 15

Joined: September 26, 2004

Location: United States

Posted: October 02, 2004 at 1:12 AM / IP Logged

OK new problem all together. I think I may have crossed some wires or something because as long as alarm is tied in with the door locks, they will not work at all via the alarm or the door switch. If I remove the alarm and tie the door locks back in to the factory settings the door switch works. Is it still possible for me to bypass the built in relay on the alarm and wire the keyless entry to work? Thanks.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Avail Phoenix2 Car Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.