the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Honda Question


Post ReplyPost New Topic
< Prev Topic Next Topic >
dmwildberger 
Member - Posts: 14
Member spacespace
Joined: February 28, 2004
Location: United States
Posted: September 30, 2004 at 4:54 PM / IP Logged  

I own a 95 Accord. I would like to remove my Alpine CD player and switch back to a factory unit. i want to install a factory unit that I got from a 2001 Accord EX, the double-DIN unit with AM/FM/CASS and a built-in 6-disc cd changer. I am doing this because I like the look of the stereo, and I'd rather have an in-dash cd changer than a flashy stereo, and I can't afford both. I have an alpine CDA-9813 receiver in it right now, which I think is awesome, but I keep getting tickets for noise violations, so i took my amp/subs out and now I just have the HU and pioneer/jbl speakers.

Here's my question:  since 1997, Accords have had the antenna in the rear window, likely eliminating the need for a power antenna lead on the stereo. My car has a power antenna, being a 1995 model, so my question is, assuming there is no power antenna lead on the 2001 unit, how do I hook my power antenna lead to my new factory stereo? I would like it to be the way it is now - it only extends when the radio is on, not when i am playing CDs or using the XM or AUX inputs, but if I can't do that, I at least need it to extend when i turn the stereo on.

Anyone ever done this before, or know a trick any help would be appreciated!

Thanks!

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: September 30, 2004 at 5:18 PM / IP Logged  
Find the power antenna wire ( I think it's a WHITE/ YELLOW or YELLOW/WHITE ) and use the switched ignition lead from the stereo to power the antenna.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Maxst 
Silver - Posts: 866
Silver spacespace
Joined: June 06, 2003
Location: United States
Posted: September 30, 2004 at 9:49 PM / IP Logged  

Why dont you just get some sound deadener and turn down the volume and gains.

If you get quality stuff and do it right, you can make 130db sound like a faint buzz.

Not meaning to give a smart ass anwser...

I need quality equipment, feel free to donate.
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: October 01, 2004 at 11:43 AM / IP Logged  
you could use something like DEI's 55000 amp remote voltage generator and use it to power the antenna instead of an amp, but the antenna will be powered whenever the HU is on, not only for tuner, without putting a separate switch in the de-activate it... and if you're gonna go to that hassle then just wire to acc from the ign switch with a small throw switch....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
dmwildberger 
Member - Posts: 14
Member spacespace
Joined: February 28, 2004
Location: United States
Posted: October 05, 2004 at 3:41 PM / IP Logged  

Thanks for the help. I got everything hooked up. When I made my wiring harness, I just cut off the end male harness from the 2001 Accord, and connected to an aftermarket female harness that plugs into my 1995 Accord. Yesterday, I drove at night for the first time since I put in the new stereo, and I noticed that the display on my radio lights up, but I cannot see any of the buttons. I know this must be a separate wire, but I don't know which one! I had four extra wires when I made the wiring harness, and I know three of them are used to link the steering wheel controls (VOL up, VOL down, CH/MODE) from the 2001 Accord to the stereo. Does anyone know which wire from the 2001 Honda Accord EX AM/FM/CASS/6-disc CD controls the dimmer / illumination of the radio buttons? Maybe a link to a site with this info? Any suggestions?

Thanks!


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer