spray-on fiberglass

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / spray-on fiberglass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

cache

Member - Posts: 37

Joined: February 19, 2004

Location: United States

Posted: October 11, 2004 at 10:11 PM / IP Logged

Does anyone spray-on their fiberglass and resin? (Thats how boat companys do it.)

Back to Top

CarAudioHelp

Copper - Posts: 198

Joined: July 18, 2003

Location: United States

Posted: October 12, 2004 at 9:41 AM / IP Logged

SnomanF150 just ordered a chopper gun and he may have it by now. You might PM him and see what he thinks. Generally most installers do not use a chop gun because it's messy. Now if you're doing a lot of mold work and cranking out the same part over and over it makes sense. Like the JL baffle plates I would guess are made with a chop gun. It's not as bad in an industrial setting.

Back to Top

HottAccord

Silver - Posts: 247

Joined: August 12, 2004

Location: United States

Posted: October 13, 2004 at 6:40 PM / IP Logged

Don't we all wish it were that easy to make enclosures and just spray everything on. Maybe sometime in the future something a little neater than a chop gun will be developed. spray-on fiberglass -- posted image.

Im a fiberglass whore!!

Back to Top

kronik66

Member - Posts: 39

Joined: August 02, 2004

Location: United States

Posted: October 15, 2004 at 4:44 PM / IP Logged

one idea i had was to modify a drywall tape gun to feed glass cloth (the type that comes spooled like tape) and have some sort of spray nozzel to spray the epoxy. i think it would be pretty cool for larger areas.

";p

Back to Top

cache

Member - Posts: 37

Joined: February 19, 2004

Location: United States

Posted: October 16, 2004 at 4:29 PM / IP Logged

ya, i had a dream the other night that i went an bought a can of fiberglass in a spray can (like spray paint)

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

spray-on fiberglass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.