code systems csi-100

Home / the12volt's Install Bay / Car Security and Convenience / code systems csi-100 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: December 01, 2004 at 5:33 AM / IP Logged

Look at all the lock/unlock wires make sure you did not shave any the insalation off, causing it to short out. And doulbe check that you got the colors right. And see if they right place in the harndess that goes to the brain. such as the purple wire is in the first one etc. Saw that a couple of times.

Back to Top

Slammed_Am

Copper - Posts: 117

Joined: December 07, 2002

Location: United States

Posted: December 02, 2004 at 11:33 AM / IP Logged

coming off the brain in the lock harness should be: WHITE/ black

BROWN / black

purple

PURPLE / black

GREEN/ black

blue/black

For using aftermarket actuators...

WHITE/ black andBROWN / black go to ground

Purple and PURPLE / black go to 12v(fused)

GREEN/ black and Blue/black one to each wire from the actuator(depending on the actuator will depend on what one is lock and un lock.)

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

code systems csi-100

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.