how to convert + input to negative input

Home / the12volt's Install Bay / Relays / how to convert + input to negative input (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sport2001l

Member - Posts: 9

Joined: October 12, 2004

Location: United States

Posted: November 30, 2004 at 8:41 PM / IP Logged

ok i need help converting a + door trigger to a negative trigger so i can use it as a trigger for my alarm on my remote start. its a 2001 ford f150 and i m gonna guess that the door switches are +

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: November 30, 2004 at 8:52 PM / IP Logged

Use a relay Pin 86 and 87 ground

Pin 85 door trigger input

Pin 30 is you negative trigger to alarm

Doen't you alarm has a positive trigger input??? Most alarms have both.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

Aaaudiowaves

Member - Posts: 11

Joined: November 26, 2004

Location: United States

Posted: December 12, 2004 at 1:11 AM / IP Logged

neg door triggers in kick panels no 2001 F1. these will time out so diode isolate

AA Audio Waves

Wildomar CA

MECP/ASE

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to convert + input to negative input

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.