1993 Dodge ram diesel remote starter install

Home / the12volt's Install Bay / General Discussion / 1993 Dodge ram diesel remote starter install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dereck

Member - Posts: 28

Joined: October 13, 2002

Location: Canada

Posted: October 13, 2002 at 12:50 PM / IP Logged

I need help installing a remote starter on my 1993 Dodge Ram Diesel Truck. I don't know where the glow plug wire on the remote starter hooks to on my truck wiring. The glow plug wire needs power when the WAIT TO START LIGHT is on and when the light goes off so does the power. I found a wire when the WAIT TO START light is on the wire has no power, then when the WAIT TO START light goes out the wire has power. I need it the other way around. I was wondering if anyone could help me please. I need to know what wire to hook the glow plug wire from the remote starter to. Thanks

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: October 13, 2002 at 12:55 PM / IP Logged

The tach wire on diesel trucks is gray/lt. blue in pin 43 or gray/black in pin 24 at the PCM on the drivers fender. The wait to start wire is GREEN / WHITE in pin 56 and it is negative polarity.

POSITIVE INPUT ----> NEGATIVE OUTPUT

87 & 86 - CHASSIS ground
30 - Ground OUTPUT
85 - 12 volt INPUT
87a - NOT USED

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

dereck

Member - Posts: 28

Joined: October 13, 2002

Location: Canada

Posted: October 13, 2002 at 1:05 PM / IP Logged

Thanks Jeff but what pin on the relay do you hook the wait to start wire to, the 30 pin? Then what wire goes to the remote starter? What Pin

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1993 Dodge ram diesel remote starter install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.