factory disarm

Home / the12volt's Install Bay / Car Security and Convenience / factory disarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

freakystyley990

Member - Posts: 33

Joined: September 25, 2002

Location: United States

Posted: October 15, 2002 at 11:32 PM / IP Logged

I have a 1992 caddy seville with a viper 550 esp and i need to know the color, location, and polarity of the factory disarm wire because this alarm is falsing like crazy. Also, will I need to use a relay for this??

FreakyStyley990

Montrealler

Copper - Posts: 155

Joined: October 05, 2002

Location: Canada

Posted: October 16, 2002 at 4:00 AM / IP Logged

Always better to use relays and fuse (save a lot of money when dooing something wrong)

You are looking for a light green small gage wire

this wirhe turn negative (-) when you unlock the driver door.

location Driver kick pannel from door gromet.

the alarm will not be set if you dont lock the doors while a door is open

Hope this will help!

Yes I'm Back 2006...

freakystyley990

Member - Posts: 33

Joined: September 25, 2002

Location: United States

Posted: October 16, 2002 at 6:23 PM / IP Logged

thanks! the other question i had was about the remote starter. whenever i use it, the car starts, runs for like 1.5 second and then dies but always stays running on the second try. how can i fix this?

FreakyStyley990

Montrealler

Copper - Posts: 155

Joined: October 05, 2002

Location: Canada

Posted: October 16, 2002 at 6:46 PM / IP Logged

tell us if you use a tach sense or voltage sense

if tach where have you find it?

Yes I'm Back 2006...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

factory disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.