Install Maunal SR5000

Could someone please tell me the wire codes for the ungo SR5000 or DEI Valet 554R (same thing) Mabey even better and hook me up with the manual? I can't find anywhere to download the install manual, just the owners manual. Thanks

Thank you very much. That brings me another question. This is going in a 2001 Jeep Grand Cherokee. I am using a Crimestopper JP-LK-TB1 interface. The interface seems to need a constant ground to disarm the OEM security when operating the remote start but the alarm seems to only send a "pulse". This is just what I'm getting from the manual so I may be mistaken but if not can I use another wire from the alarm? Like wire from the main unit to the the accessory relay?

Ok It's kinda installed now. And I got some issues. First off every time I turn on the ignition it seems that the Interface Module goes through it's programing again. The horn honks several times and the dome light goes off and then back on. Also the doors wont lock when the system is armed. They will unlock. And they will lock when the remote started though I'm not sure whether its the alarm or the module making them lock whem remote started. They will lock if I use a jumper from ground to the interface and I have checked and re checked the connections. Was it a mistake to use an interface from a different brand? I hope not.

Ok It's kinda installed now. And I got some issues. First off every time I turn on the ignition it seems that the Interface Module goes through it's programing again. The horn honks several times and the dome light goes off and then back on. Also the doors wont lock when the system is armed. They will unlock. And they will lock when the remote started though I'm not sure whether its the alarm or the module making them lock whem remote started. They will lock if I use a jumper from ground to the interface and I have checked and re checked the connections. Was it a mistake to use an interface from a different brand? I hope not.

Ok It's kinda installed now. And I got some issues. First off every time I turn on the ignition it seems that the Interface Module goes through it's programing again. The horn honks several times and the dome light goes off and then back on. Also the doors wont lock when the system is armed. They will unlock. And they will lock when the remote started though I'm not sure whether its the alarm or the module making them lock whem remote started. They will lock if I use a jumper from ground to the interface and I have checked and re checked the connections. Was it a mistake to use an interface from a different brand? I hope not.