need help with FAI-8000F

Home / the12volt's Install Bay / Car Security and Convenience / need help with FAI-8000F (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sbird58

Member - Posts: 2

Joined: January 06, 2005

Location: United States

Posted: January 06, 2005 at 7:33 PM / IP Logged

Wondering if anyone out here can help me with the instalation. i have half of the system hooked up and am not sure what to do with the rest. there are about four questions i have

i am hooking this up to a 96 mustang

first i am wondering about the central doorliocking unit.

there is already a doorlocking system in it. wondering how to find up and down, and how to find the main line

the indicator light is that the dome light? if so how do i find that

what is channel 3 output? how do i find it

finaly

the rpm to the negative of the coil. what if there is a coil pack

also with the hand brake can i bypass that so i can not use that, i have an automatic.

thanks for looking

would really like some help

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: January 06, 2005 at 11:21 PM / IP Logged

Ford

Mustang

1996-1998

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	WHITE/ PINK	IGNITION SWITCH HARNESS *
Ignition #1:	TAN/WHITE	IGNITION SWITCH HARNESS
Ignition #2:	GRAY / YELLOW (# AWG)	IGNITION SWITCH HARNESS **
Ignition #3:	GRAY / YELLOW-2WIRES	IGNITION SWITCH HARNESS ***
Accessory:	BLACK/ L GREEN	IGNITION SWITCH HARNESS
Brake Light:	RED / L GREEN (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	ORANGE / WHITE	PIN ## AT POWERTRAIN CONTROL MODULE*
Parking Lights:	BROWN (+)	AT HEADLIGHT SWITCH
Headlights:	RED / YELLOW (+)	AT HEADLIGHT SWITCH
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Powertrain Control Module Located In Passenger Kick Panel. 1997 + GT Models Are Equipped With Ford's PATS Anti-Theft System. See Installation Note #144 - Bypassing Transponder Theft Systems. * See Note #127 - Ford Ignition Switch Connection Diagram.

Ford

Mustang

1996-1998

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	YELLOW (5)	IGNITION SWITCH HARNESS
OEM Alarm Disarm:	D GREEN/ PURPLE (-)	BLACK # PIN CONN. DR. KICK PANEL
Dome Lights/Superv:	BLACK/ L BLUE (+)	GRAY # PIN PLUG IN DR. KICK PANEL****
OEM Horn:	PURPLE / ORANGE (-)	STEERING COLUMN HARNESS
Power Lock:	PINK / YELLOW	# PIN BLACK CONNECTOR *****
Power Unlock:	PINK/LT GREEN	HIGH IN DRIVER OR PASS. KICK PANEL
Trunk Release:	PURPLE / YELLOW (+)	AT TRUNK RELEASE SWITCH
Alarm Input Wire:	BLACK/ L BLUE (+)	GRAY # PIN PLUG IN DR. KICK PANEL****
Notes:	** With OEM Keyless Entry Dome Light Wire Is GRAY (+) In 12 Pin Gray Connector In Driver Kick Panel. **** Without OEM Keyless Entry See Note #203 - Reverse Polarity Door Lock Diagram, With OEM Keyless See Note #202 - Positive Pulse Door Lock Diagram.

italnpimp59

Silver - Posts: 427

Joined: August 26, 2003

Location: United States

Posted: January 07, 2005 at 1:06 AM / IP Logged

dude no offense, but i strongly suggest you take this alarm to a professional and let them install it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need help with FAI-8000F

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.