99 mustanggt doesnt like viper 350

Home / the12volt's Install Bay / Car Security and Convenience / 99 mustanggt doesnt like viper 350 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rallysport

Copper - Posts: 172

Joined: April 10, 2004

Location: United States

Posted: January 23, 2005 at 12:27 PM / IP Logged

i put the viper in my mustang. and the alarm goes off on its own almost on schedual. i havent timed it but ever 45-60 mins the alarm goes off for no reason. i have the sensitivity turned all the way down. what could be causing this? i check all my conections and they are tight, eve resoldered a few to insure no cold solder joints.

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: January 23, 2005 at 12:36 PM / IP Logged

youll need to add two more diode inline of the door triggers, band facing door trigger.

the green door trigger wire from 350hv needs to go b/t the diodes and the door switch.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

kenmci

Copper - Posts: 161

Joined: July 15, 2003

Location: United States

Posted: January 23, 2005 at 12:41 PM / IP Logged

did you have separate door triggers that you had to hook up. If you did then you need to diode isolate the door triggers from each other and from the factory module system. I'm not talking about a normal diode isolation, you have to cut the factory wiring and place a diode in line. The reason is the factory module shuts down after about 45 min and sends a negative pulse on the door wire, which in turn sets off your alarm. If you had two separate door triggers one for the driver's side and one for the passenger side then send me a pm or post again and I'll see if I can't find the diagram or i'll make another. Check my previous posts, I think I may have posted this diagram before.

Ken

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 23, 2005 at 12:43 PM / IP Logged

Or you can grab the domelight wire as the door trigger. The problem is the gem is shutting down causing the alarm to think that the door opened.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 mustanggt doesnt like viper 350

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.