Original Clifford Matrix problem

Home / the12volt's Install Bay / Car Security and Convenience / Original Clifford Matrix problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Brak

Member - Posts: 2

Joined: October 31, 2002

Location: United States

Posted: October 31, 2002 at 10:40 AM / IP Logged

I have the original Matrix system, about 10 yrs old, installed in a 92 Camaro. I had a battery short that may have caused a problem with the remote arming, possible damage to the board. Neither of my remotes work to activate the system or my hatch release. If I disconnect/reconnect the battery, the alarm sounds and all features work but no remote. I read thru my install manual and it mentions the remote antenna, I can't seem to find this or is it built into the board? Also, is there a way to reprogram the remote? Here is a link to the remote I have......... http://www.autotechs.com/items/item225.htm

Any suggestions would be appreciated.

bigwilley

Member - Posts: 16

Joined: October 31, 2002

Location: United States

Posted: November 01, 2002 at 10:52 AM / IP Logged

My guess is that you will have to program your Matrix system to recognize your remote... not sure, just a thought.

Brak

Member - Posts: 2

Joined: October 31, 2002

Location: United States

Posted: November 01, 2002 at 11:35 AM / IP Logged

Do you know the procedure to do that. I have read about opening doors, flipping the valet switch, etc. My manuals just states that it is programmed to work when installed. I do believe that I lost the programming when the battery shorted. There is no visible damage to the board.

bigwilley

Member - Posts: 16

Joined: October 31, 2002

Location: United States

Posted: November 01, 2002 at 12:19 PM / IP Logged

Not sure, but you could probably contact the manufacturer and I'm sure they would tell you.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Original Clifford Matrix problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.