kelless entry

Home / the12volt's Install Bay / Car Security and Convenience / kelless entry (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wclayton

Member - Posts: 2

Joined: October 31, 2002

Location: United States

Posted: October 31, 2002 at 12:59 PM / IP Logged

Installing Amenity RE4 Remote Entry Kit. Think it is wired ok; Automatic ignition door locks work, so i know the door lock triggers are ok; cannot get unit to recognize remote and lock the doors with buttons, or pop trunk, or light LED on dash. Constant 12 v is good to main unit, ground is good to main unit, switched 12v is good to unit. Any ideas? Remote led lights up when pressed; seems to have worked well enough to program auto ignition lock.

Bill Clayton

bill@wclayton.com

bigwilley

Member - Posts: 16

Joined: October 31, 2002

Location: United States

Posted: November 01, 2002 at 10:11 AM / IP Logged

Is the entry system programmed to recognize the remote that you have. Most modules like these, if purchased new, are not pre-programmed. The included instructions should tell you how to do this.

wclayton

Member - Posts: 2

Joined: October 31, 2002

Location: United States

Posted: November 01, 2002 at 12:48 PM / IP Logged

Figured it out; the instructions are not very clear, and they don't make it clear that in order to get the main unit to accept the remote, you really have to do the programing sequesce very quickly. Finally got the remote accepted, now it works ok//

Bill Clayton

bill@wclayton.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kelless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.