Code Alarm Prof 50

Home / the12volt's Install Bay / Car Security and Convenience / Code Alarm Prof 50 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

numbnut

Member - Posts: 5

Joined: February 23, 2005

Posted: March 03, 2005 at 7:57 PM / IP Logged

Okay!! Got the tach hooked up. Seems that Ford put a special tach output wire just for remote starts. I knew you could get a factory installed remote start so I started thinking that they should have had some wires down there for that. Got to digging around and found this: https://www.fleet.ford.com/truckbbas/non-html/2002/278.pdf They have what's is called a cto (clean tach output) wire number 76 LG/W just beside the emergency brake pedal. Made life a lot easier. Thanks for everyone who replied. If I can help in anyway please let me know.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Code Alarm Prof 50

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.