96 Voyager Factory Alarm Interfacing

Home / the12volt's Install Bay / Car Security and Convenience / 96 Voyager Factory Alarm Interfacing (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Komobu

Copper - Posts: 70

Joined: February 25, 2005

Location: United States

Posted: February 27, 2005 at 5:59 AM / IP Logged

Hi;

I am installing a Autopage rs855 on a plymouth voyager. There is a wire coming off the autopage unit to disable the factory alarm during starting. I have read the code sheets and I haven't seen anything refering to this wire. Could you please help me out and tell me what wire this is and where I can find it? Thanks for any help

Pat

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: February 27, 2005 at 11:02 AM / IP Logged

Plymouth

Voyager

1996-2000

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	PINK/BLACK, RED & PINK	IGNITION SWITCH HARNESS
OEM Alarm Disarm:	WHITE/ RED (-)	IN DRIVER KICK PANEL *****
Dome Lights/Superv:	BROWN / L GREEN (-)	GRAY # PIN CONNECTOR AT FUSE BLOCK***
OEM Horn:	BLACK (-)	STEERING COLUMN HARNESS
Power Lock:	WHITE/ D GREEN	BLACK # PIN CONN. IN DR. KICK ****
Power Unlock:	SINGLE WIRE SYSTEM	BLACK # PIN CONN. IN DR. KICK ****
Trunk Release:	N/A
Alarm Input Wire:	BROWN / L GREEN (-)	GRAY # PIN CONNECTOR AT FUSE BLOCK***
Notes:	See Note #211 - Chyrsler/Dodge Mini Van Single Wire Door Locks Diagram. ***** Wire Located at BCM in Connector Closest to the Kick Panel; A Negative Pulse Through A 665 Ohm ResistorDisarm and Unlock the Doors and A Negative Pulse Through A 4020 Ohm Resistor Will Arm and Lock the Doors.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

96 Voyager Factory Alarm Interfacing

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.