the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

03 toyota spyder, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 03 toyota spyder, remote start (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
Installtech323 
Member - Posts: 18
Member spacespace
Joined: January 05, 2005
Location: California, United States
Posted: March 07, 2005 at 11:54 PM / IP Logged  
has anyone installed a remote start on this vehicle? how did you get around the bypass switch on the brake switch??
mecp certified tech
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: March 08, 2005 at 4:27 AM / IP Logged  
specifically what are you trying to do w/ the brake switch?
are you trying to find the e-brake for MT compatible RS units?
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Installtech323 
Member - Posts: 18
Member spacespace
Joined: January 05, 2005
Location: California, United States
Posted: March 08, 2005 at 10:23 PM / IP Logged  
no im trying to install a remote start unit to this vehicle, but in order for this vehicle to crank over you have to press on the brake pedal to start it
mecp certified tech
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: March 09, 2005 at 2:22 AM / IP Logged  
very not familiar w/ these types of starter bypass. first time hearin that a car has to press on the brake to start, i assume this is a automatic tranny.
the brake wire is GREEN / WHITE, 12v+ when applied.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: March 09, 2005 at 7:58 AM / IP Logged  
Set up a relay that will engage the brake wire like it would a clutch. Use the status output wire from the unit.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer