Wire 97 Maxima Door Locks

This is a Double Pulse Lock / UNlock.  Did you wire it that way??

No I Didnt i saw the diagram for it but the unit I have has a Programable Double Pulse Option for the unlock..  But would that burn up the unit?? Thats Why I was thinking I need relays or something..?? Taking It 1 Wire @ A Time...

I also used diodes 1n4001 w/strip towards the switch the second time I tried it.. but did the same thing So I burnt out the lock unlock on both units.. the first time something like this has happen.. the remote starter and everything else on unit still works... Taking It 1 Wire @ A Time...

I know the issue is coming from the lock wiring b/c when I tried everything w/out connecting the lock wires every works perfect..  I wont to know the correct wiring before I try different Unit.. Taking It 1 Wire @ A Time...

"No I Didnt i saw the diagram for it but the unit I have has a Programable Double Pulse Option for the unlock.. But would that burn up the unit?? Thats Why I was thinking I need relays or something..??" You have the correct lock and unlock for the vechile. To reasure you, programing the double pulse option on the unit would not have damage it. You do not need to put in diode for doorlock on this vechile to have it work. You do not need relays either. The only way I can foresee smoke coming out of the unit is that you either have a +12V positive connected to the lock and unlock wire of your remoter starter/alarm unit or the unit is defective. What type of remote starter are you using? Be careful whose advice you buy, but be patient with those who supply it.