remote start APS996a

Home / the12volt's Install Bay / Car Security and Convenience / remote start APS996a (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

prangel

Member - Posts: 2

Joined: February 28, 2005

Location: United States

Posted: March 14, 2005 at 8:55 AM / IP Logged

I had a APS996a alarm installed. My brother has a APS996c.

I read on this website that the only difference between these alarams is the wiring. The question I have is that my brother can start his truck manually with the key then let's say he wants to run in the house while the truck is running he can hit the remote start while the truck is running and take the key out to keep his for For Explorer sport running. When I try this on my '03 Dodge ram it does not work. Can my alarm be defective or not programmed right when it was installed? any info is appreciated

Pedro

daniel2002p

Silver - Posts: 524

Joined: October 10, 2003

Location: United States

Posted: March 14, 2005 at 9:51 AM / IP Logged

you alarm has that same option too, to activate make sure that your foot is not on the brake and all the doors are closed, then press the start button twice and that should be it.

2005 Toyota Corolla S

1.8L VVT-i I-4

Always double check your wires with a DMM!!!

Do Not Use A Test Light!!!

MECP Certified Installer!

Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

prangel

Member - Posts: 2

Joined: February 28, 2005

Location: United States

Posted: March 14, 2005 at 10:51 AM / IP Logged

I have tried it numerous times and I cannot get it to work. My brother aslo tried it without any success. The same person installed both of ours. He told me to bring it buy to take a look at it. I just can't take it to him until next week so I was trying to see if I can find any solutions before I take it back to him.

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: March 16, 2005 at 2:33 PM / IP Logged

it will not work if it is set up for voltage ie tachless operation. have him run a tach wire and learn it , turn on the tach mode and you are all set

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start APS996a

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.