Remote Start in ford

Home / the12volt's Install Bay / Car Security and Convenience / Remote Start in ford (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jimmygunz3

Member - Posts: 6

Joined: November 05, 2002

Location: United States

Posted: November 06, 2002 at 5:23 PM / IP Logged

I installed a viper 550 esp in my 99 Expo, I am having a hard time with learning the transponder. My wires are hooked up correctly red with 12volt constant and the blue with the (-) of the remote start output which is the white and green wire. And I am using the 2 original ford keys, to program. After a few times of trying it still does not work. Does anyone know a easier way to program the transponder? Thanks alot

Back to Top

Player69

Silver - Posts: 504

Joined: October 27, 2002

Posted: November 06, 2002 at 5:57 PM / IP Logged

What is the procedure to program it? I am not familiar with the viper but I assume that you turn the first key on, then the second, then start with the remote start? If so, make sure after each key is turned on, you wait for the light to go out, then do the second, then start with remote start.

Also make sure the remote start is programmed correctly to provide a pulse out while running.

Back to Top

anonymous

Member - Posts: 24

Joined: November 06, 2002

Location: Canada

Posted: November 06, 2002 at 6:14 PM / IP Logged

Sometimes the learn a new key routine is actually locked off in the BCM. If this is the case then you will have to go to your Ford dealer and have them unlock it for you.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote Start in ford

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.