the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Clarion Amp shutting down


Post ReplyPost New Topic
< Prev Topic Next Topic >
Tcole 
Copper - Posts: 92
Copper spacespace
Joined: October 04, 2002
Location: Canada
Posted: November 08, 2002 at 1:14 PM / IP Logged  

I have a Clarion DPX1000.2 that will shut down on me for about 10 seconds when I turn the volume up to about 3/4 and the gain is at about 1/3 on the amp.

Background:89 Nissan Pathfinder

Signal comes from a Sony cd head unit low pass output to an Audiocontrol Epicenter. From there it passes into the Dpx1000.2. The crossover (24db/oct) is set at 90Hrz. The amp operation is set to mono with the subsonic filter set to on. I have a 4 Guage power=ground. All connections are good and I have used Stinger and Audiobahn connects so quality should not be an issue. The amp is also cold to the touch so heat shouldnt be an issue.

The amp is powering (2) 8" Rockford HE 4 ohm subs in .30 cu/ft sealed enclosures.

I suspect the signal is clipping. Maybe someone knows what is happening and the remedy. Maybe I have high expections, it is easy to drive those subs to there limit. In the spring I am puttin in 12s.

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Posted: November 08, 2002 at 6:23 PM / IP Logged  
Check to make sure you have a good ground. Also you could have a bad sub.Try to disconnect one and turn it on and see what happens. Try this for both subs and then let us know the results.
JellyNutz 
Copper - Posts: 85
Copper spacespace
Joined: August 18, 2002
Location: United States
Posted: November 11, 2002 at 12:38 AM / IP Logged  
The most probable cause of your problem is the way your subs are wired.  If you have them wired in parallel you are presenting the amp with a 2 Ohm load...  That will shut 'er down real quick.  If thats not the problem, check your ground.  Could also be several other things, but try those first and tell us what happens

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer