Alarm Install Problems in and 05 F150.

Home / the12volt's Install Bay / Car Security and Convenience / Alarm Install Problems in and 05 F150. (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: April 03, 2005 at 12:55 PM / IP Logged

Velocity motors has your solution the body control module on the car sends a pulse to check the door pin status thus falsing your aftk. alarm. The doides are to seperate the cars door pins from one another and the relay to receive the voltage change when the bcm is about to shut down thus not falsing your aftk. alarm.

Back to Top

Drtechnical

Member - Posts: 14

Joined: February 14, 2005

Location: United States

Posted: April 03, 2005 at 2:48 PM / IP Logged

Thanks Jeff, KarTune, and Nava....if I'm reading this right if I diode isolate the wires from the bcm and the triggers to the alarm, my alarm will stop falsing and I can get rid of the noisy relay?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 03, 2005 at 11:06 PM / IP Logged

yup, that is correct.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

tcr03

Member - Posts: 12

Joined: April 03, 2005

Location: United States

Posted: April 03, 2005 at 11:15 PM / IP Logged

yeh i had the same problem last week on an 04 f150. we did diagram B. it solved the problem.

Back to Top

audifive

Copper - Posts: 89

Joined: June 02, 2004

Location: United States

Posted: April 03, 2005 at 11:30 PM / IP Logged

its really easy to find the wires under the driver side rear sill panel instead of going to the bcm in the back behind the seat. all 4 are there and there is only about 15-20 wires to sort through.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 04, 2005 at 2:19 PM / IP Logged

Keep us posted Doc.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm Install Problems in and 05 F150.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.