I don't get it!

Home / the12volt's Install Bay / Car Security and Convenience / I don't get it! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

c0ckeyed00

Copper - Posts: 61

Joined: October 14, 2003

Posted: April 27, 2005 at 3:02 AM / IP Logged

I tried to wire my dome super for my 02 Ford F250 and I don't get the wiring. I found the wire that leads directly to the domelight. I tried to touch 12v to it and when I did, I heard relays going off.....????? Has anyone hooked up the domelight supervision on an 02 F250 before?

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: April 27, 2005 at 3:55 AM / IP Logged

What alarm is it. and you shold probabaly use a relay to turn it on rather than the alarm directly

What the output for the dome light supervision??

dare_ds69

Silver - Posts: 419

Joined: January 25, 2005

Location: New Jersey, United States

Posted: April 27, 2005 at 5:47 PM / IP Logged

Dome Supervision

BLACK/ lt.blue

passenger kick panel

you must have to use a relay to do it.

how own your mind, control your life.

MECP certified. always use a DMM

Smoke Signals

Member - Posts: 12

Joined: March 29, 2005

Location: United States

Posted: April 27, 2005 at 8:08 PM / IP Logged

You can also get to the BLACK/ lt. blue wire in the grey molex connector to the right of the steering column. That's where I connected mine (2000 F250)

c0ckeyed00

Copper - Posts: 61

Joined: October 14, 2003

Posted: April 27, 2005 at 8:33 PM / IP Logged

I have a viper 791xv. when i was trying to do it i was testing with a 12v source. i followed the wire directly from the dome down to the kick panel, then when i cut it the domelight went off. so in my head i was set that this was the dome wire. then i tried to tap 12v to that wire so see the dome flicker but nothing...just relay clicking....i will try the ....."...BLACK/ lt. blue wire in the grey molex connector to the right of the steering column....".... tonite and see what happens. i will keep you informed.

thanks

hey Smoke Signals, when you hooked it up, did you just tap into it from a relay or did you diode it?

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: April 27, 2005 at 8:42 PM / IP Logged

Why did you cut the Dome Light wire?? U just need to splice in to it

Don't Learn from Others Mistakes

You Might Be the One That Knows.

c0ckeyed00

Copper - Posts: 61

Joined: October 14, 2003

Posted: April 28, 2005 at 8:44 AM / IP Logged

i wanted to ake sure that was the one.....i thought another wire was the dome because it acted like it....when the domelight went on, it would get 12v so i hooked it up to that and when i tried it, a little light on my door went on....

Smoke Signals

Member - Posts: 12

Joined: March 29, 2005

Location: United States

Posted: April 28, 2005 at 8:23 PM / IP Logged

No need for diode.

Here's what you do: H1/4 (Blk/Wht) connects to terminal 85 on the relay. Tap the door trigger wire (blk/lt. blu) and connect to terminal 30 on the relay. Terminals 86 and 87 on the relay both connect to 12v constant.

Hope this helps.

nava94

Silver - Posts: 296

Joined: February 28, 2004

Location: United States

Posted: April 28, 2005 at 10:58 PM / IP Logged

bad way of testing for a wire.so far you been lucky so buy a digital meter before you fry something.

c0ckeyed00

Copper - Posts: 61

Joined: October 14, 2003

Posted: May 05, 2005 at 12:30 AM / IP Logged

I finally got back in town and wire the domelight. I found the wire in the driver kick. thanks a lot for everyones help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

I don't get it!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.