toad 101 cl

Home / the12volt's Install Bay / Car Security and Convenience / toad 101 cl (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ace.3

Member - Posts: 8

Joined: April 29, 2005

Location: United Kingdom

Posted: May 07, 2005 at 9:11 PM / IP Logged

does anyone have the dual zone proxy sensor wires into the alarm ie were do they attach to as they go into the alarm on the 4 pins.

kps67

Member - Posts: 25

Joined: December 15, 2004

Location: United States

Posted: May 08, 2005 at 3:19 AM / IP Logged

You can color match the wires with the shock sensor if it is made by the same copmany using diodes. If not check to see if your alarms has auxilary alarm trigger that you can connect teh proximity sensor to.

ace.3

Member - Posts: 8

Joined: April 29, 2005

Location: United Kingdom

Posted: May 08, 2005 at 6:09 PM / IP Logged

cheers m8 all sorted now.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

toad 101 cl

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.