97-01 Prelude power wire routing?

Home / the12volt's Install Bay / Car Audio / 97-01 Prelude power wire routing? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cleanlude

Member - Posts: 19

Joined: May 09, 2005

Posted: May 10, 2005 at 4:02 PM / IP Logged

Hey guys,

what is the best and easiest way to run 2 GA power wire through the firewall. I'd like to avoid drilling if possible.

Any ideas or suggestions appreciated.

Thanks

Jeff

5150azn

Silver - Posts: 584

Joined: June 21, 2004

Location: United States

Posted: May 10, 2005 at 4:36 PM / IP Logged

Let me know too! lol

Tell the Snap-On guy I'm not here!

Customautomotiv

Copper - Posts: 128

Joined: March 22, 2005

Location: United States

Posted: May 11, 2005 at 11:52 PM / IP Logged

try the passenger side firewall.....black boot.....it should come out under the glovebox inside the car.....thats how I ran my 4 guage wire ....hope 2 guage will fit...good luck

Search for other posts by Customautomotiv

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97-01 Prelude power wire routing?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.