Compustar sends but doesn’t receive

Home / the12volt's Install Bay / Car Security and Convenience / Compustar sends but doesn’t receive (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ekdude

Member - Posts: 36

Joined: March 05, 2005

Posted: May 14, 2005 at 4:59 PM / IP Logged

Alarm is the compustar 2WFM-AS

Everything works as you press the buttons on the remote, but recently the remote does not receive the signal back with beeps or what not.... (for example: say the alarm is disarmed right now, then you press button I to arm.. on the remote it'll show that the car is still disarmed...really strange) as well it doesnt' beep or anything when you autostart the car ... it's almost as if the alram is a 1way rather than a 2way... any clues on how to troubleshoot this?

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: May 15, 2005 at 1:03 AM / IP Logged

check the antenna and make sure it did not get pinched at all.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Compustar sends but doesn’t receive

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.