Kenwood KVT715 park bypass

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Kenwood KVT715 park bypass (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

12vbattery

Member - Posts: 17

Joined: June 19, 2004

Location: Canada

Posted: May 23, 2005 at 5:39 PM / IP Logged

hey all,

i've searched through the forum and have found a few topics related to this model, and plenty related to the parking bypass. While I understand the main way to bypass is by grounding the parking brake wire, I had bestbuy install my deck for me. They took off the label which identified the parking brake wire, and there is two green wires which are comming out of the brain. (I remember 1 green wire is the parking brake, while the other im not too sure of).

I opened up the center console where the parking brake is, and there were no green (or any color) wires connected to it. Therefore I have no idea which wire to ground, or how to, for that matter! would I just splice the wire and attatch it to a piece of metal?

Thanks

Bknight187

Member - Posts: 14

Joined: May 23, 2005

Location: United States

Posted: May 26, 2005 at 10:28 PM / IP Logged

If you pull out the screen there will be a small 4 pin plug, in it should be a red, yellow, black, and green. Take the green from that plug and connect it to ground. The reason you don't see a wire going to the parking brake is because they grabed the brake wire some were else in the car.

Bknight187

First Class MECP Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kenwood KVT715 park bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.