'05 dodge ram remote start ?

i have installed a viper 791xv and the remote start works. the problem i have is that the manual states to hook up the orange wire to the accessory which in the truck is pink / YELLOW & dk. Blue how are you able to connect one wire to multiple accerory wires? i found that the dk.blue is the blower and the 16ga is the ac. do i need to isolate these wire with a relay

any help would be great

sorry , i forgot 1 thing

when the parking lights are hooked up and the accessory wire is hooked to the blower and the ac wires the ac cuts out with the flashing of the parking lights

First off----

Did you isolate the parking light wire from the switch with a relay.  Also you only have to hook up the ACC wire that powers the blowers..The only reason to hook up the other one is if you want the radio  on,,

"break" your parking light wire with a relay, and use a 270ohm resistor

Purple / YELLOW wire cut it switch side to 87a, car side of the wire to 30. Ground to 87 and 86. in line with pin 87 put 270 ohms of resistance. Pos trigger from unit to pin 85.

Parking lights flash.

Your second accs. IS needed, use the smaller of the 3 wires that are the same color. If you do not power it up the ABS light might come on and stay on!!! Wire color is pink / YELLOW.

For wiring multiple acc. wires with one trigger, use two relays