88 gmc s15 jimmy keyless entry

cannot figure out how to do the 5 wire. looked at relay section of the 12volt web site, followed it and it did not work can someone please help me?

tjmutlow wrote: cannot figure out how to do the 5 wire. looked at relay section of the 12volt web site, followed it and it did not work can someone please help me?

i am installing a viper system with 2 wire negative lock output

You need 2 SPDT RELAYS:

Cut wires of Vehicles Door Lock / UNLock in half.One half goes to Door Lock / UNLock ActuatorOne half goes to Door Lock / UNLock switchFollow directions and DON'T get wires wrong.ALSO:  Make sure you get Single Pole Double Throw  ( SPDT )Relays.  Some relays look like SPDT but are SPST.

2 SPDT RELAYS:

Relay 1

LOCK:

PIN 87 = Light BLUE wire from Door Lock ActuatorPIN 87a = Light BLUE wire from Door Lock SwitchPIN 30 = 12 Volts ( + ) ConstantPIN 85 = Negative Lock Output from ViperPIN 86 = Constant 12 volt ( + )

Relay 2

UNLOCK:

PIN 87 = BLACK/ WHITE or WHITE  wire from Door Lock ActuatorPIN 87a = BLACK/ WHITE or WHITE wire from Door Lock SwitchPIN 30 = 12 Volts ( + ) ConstantPIN 85 = Negative UNLock Output from ViperPIN 86 = Constant 12 volt ( + )

Power Lock	LT BLUE	DRV SPEAKER OR DRIVER KICK PANEL
Power Unlock	BLACK/ WHITE OR WHITE

Reversal Rest At Ground Door Locks

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.