door lock/unlock wont work with 350hv

Home / the12volt's Install Bay / Car Security and Convenience / door lock/unlock wont work with 350hv (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

littlepapa87

Member - Posts: 4

Joined: August 03, 2005

Location: United States

Posted: August 03, 2005 at 9:20 PM / IP Logged

I am installing a Viper 350HV system in my 92 Ford explorer. I have pre-existing power door locks, but not keyless entry. Everything was going well in the installation untill i got to the keyless entry. I can not tell how to wire the keyless entry from the provided instructions. the power lock switch has a pink/green wire that give off +12v when I press unlock and pink / YELLOW give off +12v when i press lock. There is one wire that gives off constant +12v and 2 grounds. I have tried tapping into the pink wires but it does not work. any help on how to install this would be greatly appreciated.

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: August 03, 2005 at 9:26 PM / IP Logged

your ahve 5 wire locks.

click here

littlepapa87

Member - Posts: 4

Joined: August 03, 2005

Location: United States

Posted: August 03, 2005 at 9:31 PM / IP Logged

i saw that earlier but i dont understand how and where to put the alarm output wires

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: August 03, 2005 at 9:39 PM / IP Logged

the green and blue wire form alarm will go to pins 85 and 86. look at those it say - from alarm lock out put an d- form alarms unlock out put.

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: August 03, 2005 at 9:46 PM / IP Logged

If your Explorer came WITHOUT Factory Keyless Entry:

U will need 2 SPDT Relays

Cut your PINK / YELLOW & PINK/Green wires in half

Relay 1

LOCK:

PIN 87 = PINK / YELLOW wire from Door Lock Actuator

PIN 87a = PINK / YELLOW wire from Door Lock Switch

PIN 30 = 12 Volts ( + ) Constant

PIN 85 = Negative Lock Output from Viper

PIN 86 = Constant 12 volt ( + )

Relay 2

UNLOCK:

PIN 87 = PINK/Green wire from Door Lock Actuator

PIN 87a = PINK/Green wire from Door Lock Switch

PIN 30 = 12 Volts ( + ) Constant

PIN 85 = Negative UNLock Output from Viper

PIN 86 = Constant 12 volt ( + )

If your Explorer came WITH Factory Keyless Entry:

Hook your Viper Lock / Unlock wires directly to the Factory wires ( don't cut them in half )

Don't Learn from Others Mistakes

You Might Be the One That Knows.

littlepapa87

Member - Posts: 4

Joined: August 03, 2005

Location: United States

Posted: August 03, 2005 at 9:53 PM / IP Logged

do you know where pins 85 and 86 are located on a 92 ford explorer

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: August 03, 2005 at 9:56 PM / IP Logged

WHOA.....................

The PINS that we are talking about will be on the 2 S P D T Relays that you need to install (Single Pole Double Throw)

Don't Learn from Others Mistakes

You Might Be the One That Knows.

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: August 03, 2005 at 9:58 PM / IP Logged

If you are NOT familiar with this type installation, get help from someone who knows........ You CAN cause damage to your Door Lock Switches

Don't Learn from Others Mistakes

You Might Be the One That Knows.

littlepapa87

Member - Posts: 4

Joined: August 03, 2005

Location: United States

Posted: August 03, 2005 at 9:58 PM / IP Logged

ok i thought they were in the door panel that clears a lot up for me i believe i can get it from here thank you very much for all your help

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door lock/unlock wont work with 350hv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.