stand alone starter kill? 93 integra

Home / the12volt's Install Bay / Car Security and Convenience / stand alone starter kill? 93 integra (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

roccosland

Member - Posts: 8

Joined: September 10, 2005

Posted: September 10, 2005 at 11:32 PM / IP Logged

Is there a way to wire a stand alone starter kill switch without an alarm? I would be using a toggle switch. I found the diagram for the passive starter kill switch that uses 2 relays and I wired myself an assembly. Do I need diodes in the setup?

Back to Top

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: September 11, 2005 at 1:40 AM / IP Logged

check to the left under starter interrupts, this might help.

gcorrea

Back to Top

footbaldd

Copper - Posts: 84

Joined: May 10, 2005

Location: United States

Posted: September 11, 2005 at 2:28 AM / IP Logged

i have a 90gs, and i just put in a stand alone kill switch. i made a latching relay similar to the one in the diagram on this site to break 12+ going to the fuel pump from the relay. you could wire it off any momentary switch, and using key on power have it break continuity whenever the car is turned off. if you need a better explaination or assistance just let me know, but i found the articles on here to have just about everything i needed.

Back to Top

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: September 12, 2005 at 3:47 AM / IP Logged

just need a switch and one 30A spdt relay

Why oh Why didn't i take the blue pill

Darren Power

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

stand alone starter kill? 93 integra

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.