lock actuators

Home / the12volt's Install Bay / Car Security and Convenience / lock actuators (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

shortdogchap

Member - Posts: 28

Joined: April 08, 2005

Location: United States

Posted: September 16, 2005 at 11:18 AM / IP Logged

i am going to install 4 lock actuators on my manual locks on my 2005 chevy aveo 4 door...my alarm is a crimestopper cs2016fm ..my question is how many relays are needed....just one lock relay and one unlock relay for a total of two relays....or do i need a set of two relays per door.....i have looked at this sites diagram for adding actuators....but there is only two outputs after the relays are wired..two leads that go to the green and blue wires on the actuator....does that mean i just wire all four actuators to the same two leads....any feedback would help thx

steve

Back to Top

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: September 16, 2005 at 11:59 AM / IP Logged

yes, tie in all 4 actuators to the two outputs. But for 4 actuators, be sure you use at least a 25 amp fuse on your power wire feeding the relays.

Back to Top

shortdogchap

Member - Posts: 28

Joined: April 08, 2005

Location: United States

Posted: September 16, 2005 at 12:39 PM / IP Logged

ok i thx cutdog

steve

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

lock actuators

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.