How and Where to bypass Anti-theft

The remote starter is  2 ways pager cs 2009 FM which is installed in Mercury villager 2001.

Everything is working fine ( doors, lights...) but cannot make the engine running. the engine cranks but doest start running.

I doubted that this is a anti-theft purpose, but I did hook the wire to disable the Factory alarm. I hooked up this wire to the Unlock wire that come from the driver side (the unlock wire with the key from exterior). and I still wonder if this is the right way.

I wan to know How and where to disable the Factory alarm system.

can anybody help Please...

Any help, ideas or suggestions will be very appreciated.

This is what I hook up (and please correct me if i'm wrong)

1) Red to my starter wire(violet)

2)Brown to my Ignition 1 wire(yellow)

3)RED / Green to my Ignition 2 wire(brown)

4)WHITE/ Green to my Accessory wire (Orange)

And 2 other red wires of my transceiver are hooked up to power source 12v

Please tell me which wire I hooked up wrong?

|              12V|WHITE/ red           |+  |ignition harness            |

|          STARTER|BLACK / YELLOW        |+  |ignition harness            |

|   SECOND STARTER|BLACK/ green         |+  |ignition harness            |

|         IGNITION|BLACK/ white         |+  |ignition harness            |

|        ACCESSORY|blue                |+  |ignition harness            |

| SECOND ACCESSORY|red                 |+  |ignition harness

This is what I have for the vehicle wire colors. It doesn't mach what you have.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

First, I would like to Thank you for many efforts that you give. the vehicle wire colors will certainly help me out. First when I started working on my minivan I found that the color wires from the Ignition key cylinder to the connector did not match to the schematic (see below) that I have but they do match to what you post in here. Infact I have tried to copy and paste the schematic along with my message but It doesn't work. And here one more time I insert the picture of both(cs2009 and schematic) and would you please to give me one more time about the correct hook up instruction:

The picture is at: http://www.geocities.com/soudaly/cs2009fm.htm