Help with 02 Tahoe

Home / the12volt's Install Bay / Car Security and Convenience / Help with 02 Tahoe (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jmyinc

Copper - Posts: 59

Joined: May 02, 2002

Location: United States

Posted: December 14, 2002 at 10:52 AM / IP Logged

Where is the factory disarm for this vahicle and what do I do to it? Also how do you bypass teh transponder system.

Thanks,

Morgan

-Morgan

AlarmTech

Copper - Posts: 101

Joined: December 08, 2002

Location: United States

Posted: December 14, 2002 at 11:27 AM / IP Logged

factory disarm = light green and located in the driver kick panel (also found in the purple plug at the BCM. By using the alarms unlock wire, split it into 2 wires, diode isolating them and run one to the unlock wire and one to the factory disarm wire.

a transponder bypass module is needed, either a DEI 555T or 555L. or from here http://www.transponderbypass.com/

Viper Equipped

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Help with 02 Tahoe

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.