Parking Brake wire

Home / the12volt's Install Bay / Car Security and Convenience / Parking Brake wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dereck

Member - Posts: 28

Joined: October 13, 2002

Location: Canada

Posted: December 15, 2002 at 11:20 AM / IP Logged

I am trying to install a ProStart CT-3160M for manual transmissions and it calls for a wire from the RS to be hooked up the the parkbrake wire. The wire on the RS in (-). On the 2002 Chevy Tracker I found 2 wires going to the park brake light on the instrament pannel. When I hook up a test light to either one of these wires the light goes on so I hooked the RS wire to one of these. Is this right?

How can you test a wire that is (-)? I want to test the (-) door trigger wire to see if this is the right on. So I wan't to test the wire with the door trigger in and the door trigger out. What do I do to test this?

Phatmex

Member - Posts: 20

Joined: December 08, 2002

Posted: December 15, 2002 at 11:24 AM / IP Logged

Test continuity with one lead at ground. If all you have is a test light, connect it to a known positive and connect the neg. lead to the lead you want to test.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Parking Brake wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.