1996 Cutlass Supreme, power wire

I am trying to find out some places I could run the power wire in this vehicle. It is 4 guage wire.

i had a 95 befor and i justed did my girls 96 grand am .same problem very tight and resrticted. and most of it is double skin. the best place is under the brake pedal. right in between the gas pedal where the black padding stops that covers the inside of the fire wall and the insolation and carpet begans. well the over lap a little bit. sounds wierd but it takes you right out under the rack and pinion and above the lines that run across the fire wall and just right of the strut tower.on the drivers side. if you try the passanger side you would have to contend with the pcm ,heater box ,and and ton of other stuff. so that spot is the best place i've found. it's takes you on the same side as the battery ,you pull it up from that point ,hop over the snorkel for the air cleaner mount and your all done. good luckJUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

thats a myth... you don't have to do that. i run my power wire, 3 sets of rcas, and 2 strands of speakerwire on one side of the car with no problems. i lied, problems will occur if your using shhhty wiring with bad shielding and such. www.knukonceptz.com , buy wiring there.