door trigger

Home / the12volt's Install Bay / Car Security and Convenience / door trigger (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

qwerty

Member - Posts: 6

Joined: November 17, 2002

Location: United States

Posted: December 31, 2005 at 12:24 PM / IP Logged

about to install an alarm in 2005 chrysler pacifica but the door trigger for both door in the front is on module in door.having problem stringing wires in door any recommendation or an alternate wire any help will be appreciated thx

catalin capota

Copper - Posts: 74

Joined: December 28, 2005

Location: British Columbia, Canada

Posted: December 31, 2005 at 12:41 PM / IP Logged

This is what I have on the Pacifica;

"The driver door trigger is purple at the driver door module in the door. The passenger door trigger is PURPLE / white at the passenger door module in the door. The LR door trigger is PURPLE / gray at the BCM, C2, pin 8. The RR door trigger is purple / YELLOW at the BCM, C3, pin 5. Use all four wires and diode isolate each.

The BCM (Body Control Module) is on the driver side firewall under the dash."

Looks like you'll have to go in the module... OR you might be able to use a transponder bypass module. Some have other ouputs that are useful.

Search for other posts by catalin capota

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 31, 2005 at 1:09 PM / IP Logged

CHRYSLER, PACIFICA, 2005, Door Trigger

The driver door trigger is purple at the driver door module in the door. The passenger door trigger is PURPLE / white at the passenger door module in the door. The LR door trigger is PURPLE / gray at the BCM, C2, pin 8. The RR door trigger is purple / YELLOW at the BCM, C3, pin 5. Use all four wires and diode isolate each.

The BCM (Body Control Module) is on the driver side firewall under the dash.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 31, 2005 at 1:52 PM / IP Logged

I have used the domelight wire in the A pillar, had no falsing at all. I do this on the Caravans too, no problems.

Mike M2

Tech Manager

CS Dealer Services

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 31, 2005 at 2:11 PM / IP Logged

Astro's IOM-Chrysler 6 controls door locks, sentry key bypass, arm, disarm factory security, sliding doors and hatch.....AND detects any door opening.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door trigger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.