00 chrysler town and country

Home / the12volt's Install Bay / Car Security and Convenience / 00 chrysler town and country (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

robdog1969

Member - Posts: 29

Joined: December 29, 2005

Location: United States

Posted: January 07, 2006 at 5:20 AM / IP Logged

you dont need any of that if you go to the relays in front of the fuse box..... just solder to the leg of neg input ....their maybe a seporate relay just for Dr. door unlock , doide isolate it.... this saved me in a pinch on the road one time.....

over 20 years of experience in the 12 volt industry

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: January 07, 2006 at 10:51 AM / IP Logged

Use the WHITE/ red wire with resistors and relays. The advantage to this is that if any door is still open when you hit the remote's lock button, the vehicle's BCM will lock all the doors after all are closed. The wire tap into the relay method won't. The resistor method usually illuminates the interior light on unlock too.

sparky

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

00 chrysler town and country

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.