Remote start, 97 monte carlo? newbie

Home / the12volt's Install Bay / Car Security and Convenience / Remote start, 97 monte carlo? newbie (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Kyle1058

Member - Posts: 7

Joined: July 16, 2005

Posted: January 14, 2006 at 9:32 AM / IP Logged

This is gonna be my first alarm/remote starter install... everything looks straight forward with the exception of the remote starting/ignition aspect.

I will be installing an UltraStarter 4255 remote starter with 2-way alarm. I have a 1997 monte carlo with aftermarket power locks/windows. Theres already some Prestige audiovox alarm (APS510) but i will unhook that before i begin my install.

I have a few questions.

1) Do I have to hook anything up to the factory re-arm output or factory dis-arm output if i have no factory alarm?

2) How do i hook up the "Starter Kill & Anti-Grind Output"? Do i need to buy a relay?

3) On the alarm, there is "Start output" and "ignition output". How do i hook these up?

The alarm info on this site for my vehicle lists wires for; Starter, Ignition 1, Ignition 2, and Ignition 3... Do I need to hook all these up, or which ones do i need to hook up to the alarm?

Thank you very much!

-Kyle

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 14, 2006 at 10:36 AM / IP Logged

you dont need to hook up anything for factory alarm.

the starter kill relay diagram is on this site,look under relays.

The starter output goes to the yellow start wire on your ignition harness,The Ignition output wire from your unit goes to the pink ignition wire in the same harness.

Kyle1058

Member - Posts: 7

Joined: July 16, 2005

Posted: January 14, 2006 at 10:43 AM / IP Logged

Thanks,

I guess the only thing i don't get now is the starter kill/anti-grind..

https://www.the12volt.com/relays/page2.asp

My alarm has a NEGATIVE (-)250ma output for the starter kill/anti-ground output...

Which starter interrupt relay should I use?

Thank you!!!

-Kyle

mike swanson

Copper - Posts: 290

Joined: January 28, 2003

Location: United States

Posted: January 14, 2006 at 11:37 AM / IP Logged

The starter relay may not have all the plugs on it if it came with the kit

Kyle1058

Member - Posts: 7

Joined: July 16, 2005

Posted: January 14, 2006 at 7:38 PM / IP Logged

mike swanson wrote:

The starter relay may not have all the plugs on it if it came with the kit

Actually, i was asking which of the relay diagrams (which way to hook up the wires)..

thanks!

prdjr165

Copper - Posts: 293

Joined: October 31, 2002

Location: Illinois, United States

Posted: January 14, 2006 at 11:14 PM / IP Logged

you should use the basic starter kill diagram.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote start, 97 monte carlo? newbie

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.