Problems with Compustar Remote Start

I guess it's not the fuses since i never replaced those the first time I replaced the brain and it worked fine. It must be somthing with the brain itself since it's the second time it happens. yes, it's not a problem with the remote. The remote works fine. Is there a way to master reset the brain? here is another symptom, It now auto locks/unlocks the doors with the e-brake. It never did that before! ebrake down locks the door, ebrake up unlocks the doors. thanks a bunch!

How do you guess it is not the fuses???? If it is powering up ignition, parklights, etc. upon remote start, but does not crank.... it could very well be the fuse for the starter output of the unit. Check it. You will need to probably reprogram the unit for the features that you want. The install manual or the person that installed it will have this information for you. It is probably in default programming. You may also need to learn tach.... start the car with the key, then press the programming switch on the side of the unit. Gus Wherever I go, that is where I end up......

compustar tech support had given me a hard time before becuase i wasn't a dealer but this time they helped me. Here is the solution: press btn 1 and 2 at the same time for two secs. Then press button 3 for three times. I had to do that twice and now it works fine! they said it's something about the disel setting. THanks for all the suggestions!