converting 200mA to 500mA

Home / the12volt's Install Bay / Relays / converting 200mA to 500mA (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

j68rh

Copper - Posts: 147

Joined: March 31, 2005

Location: United States

Posted: January 31, 2006 at 7:27 AM / IP Logged

How is a relay wired to up my trigger out from the alarm from 200mA to 500mA

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: January 31, 2006 at 9:30 AM / IP Logged

87 ground, 86 12volts, 85 your excisting neg trigger, 30 your new trigger

Back to Top

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: February 04, 2006 at 10:26 PM / IP Logged

If you use a relay you'll most likely convert from 200mA to 20 or 30A. If you really only want 500mA you'll need to use a transistor, not a relay. However, the relay approach would be easier, and in the long run more reliable.

Kevin Pierson

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

converting 200mA to 500mA

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.